Ease your dehumidifier calculation with Srimka calculator.

Selection of dehumidifier capacity calculation for selecting the right dehumidifier depends mainly on the room size, present humidity, desired humidity and room temperature. This is applicable for all residential, commercial and industrial applications. Air exchange ratio is applicable if you have HVAC systems. If you have these parameters, you can use our design calculator to find out the right dehumidifier capacity.

Input following details for dehumidifier capacity calculation. This is particuarly developed in accordance with calculations, applicable in Dubai, Abu Dhabi or any emirates of UAE. Get for GCC regions as well.

Explanation of the Result

This indicates that the calculated quantity of water (as mentioned above) must be removed from the air to achieve the desired humidity level under the conditions provided by you. Accordingly, you should select a dehumidifier with a matching capacity. Dehumidifier capacity is generally specified in liters per hour, kilograms per hour, or similar units.

How to Select a Dehumidifier

The following steps are mainly intended for commercial applications.

• Gather details such as room size, current temperature, existing relative humidity, desired relative humidity, and air exchange rate (if air conditioning is present).
• Use our free software to calculate the required dehumidifier capacity.
• Based on the calculated result, review the performance charts of a few models with similar capacities.
• Choose the model that best matches your requirements as per the performance chart.
• Decide the mounting type: floor-mounted, wall-mounted, or duct-mounted.
• For normal room temperatures, condensation-type dehumidifiers are suitable.
• For operating temperatures below 10 °C, select desiccant dehumidifiers or condensation dehumidifiers with a de-icing feature.

The calculation sheet provides the exact dehumidifier size required for your application. You enter the present conditions of your home, office, warehouse, cold room, walk-in freezer, etc., and the result gives the precise capacity needed. For large areas, it is advisable to use multiple dehumidifiers to improve air circulation and achieve faster dehumidification.

How to Calculate Dehumidification Capacity Using the Calculation Sheet

Enter the required input values and click the button Click here for Dehumidifier result.

Present Temperature (°C)
Enter the normal room temperature. To assess the worst-case scenario, you may use the highest temperature recorded during a specific period. Note that higher input temperatures will result in a higher required dehumidifier capacity, increasing overall cost.

Present Humidity Level (%RH)
Enter the current humidity level. For worst-case analysis, use the highest recorded humidity. For accurate results in industrial and commercial applications, measure humidity using a hygrometer. Weather data may be used for open warehouses, while offices generally require on-site measurements.

Desired Humidity (%RH)
Enter the target humidity level you wish to achieve. For homes and offices, recommended humidity ranges from 40% to 60%. For storing medicines in a walk-in freezer, humidity should typically be maintained at a maximum of 60–65%.

Room Dimensions
Enter the dimensions of the area to be dehumidified. Since dehumidifier capacity depends directly on the volume of air in the space, accurate room size is critical. You may enter length, width, and height in meters, or directly input the room volume in cubic meters if available.

After entering all values, click Click here for Dehumidifier result.

Understanding the Results

The results are displayed in kg/hr, liters/hr, and US pints/hr. This represents the amount of moisture that must be removed from the air per hour. Dehumidifier capacity is defined by the volume of water removed per hour or per day, and daily capacity values are also provided. Based on this data, you can select a dehumidifier that meets the required capacity.

Note: This calculation is provided for guidance only. We do not assume any contractual responsibility for the results or the calculation methodology.

How to Select Dehumidifiers After Calculating Capacity

Based on the calculated results, you can choose a suitable dehumidifier from our wide range of products. For commercial and industrial applications, you may contact our experts for free assistance.

Swimming Pool Dehumidifiers
Swimming pools generate large amounts of moisture, which can severely affect surrounding areas. The above calculation sheet does not apply to swimming pools. Please contact us for a dedicated evaluation and review our range of swimming pool dehumidifiers.

Portable Dehumidifiers for Home and Office
These comfort-series dehumidifiers are sleek, quiet, and available in various sizes and designs. Recommended room sizes are listed for each model, so detailed calculations may not be necessary. However, for precise sizing, you may still use the calculation method described above.

Basement Dehumidifiers
Basements are prone to high humidity because moist air settles at lower levels. If not controlled promptly, excess humidity can cause significant damage. Please refer to our basement dehumidifier range for suitable solutions.

Commercial Dehumidifiers
These units are designed for industrial and commercial use, including warehouses, factories, restaurants, hotels, auditoriums, construction sites, dairy farms, breeding farms, and more.

Condensation Dehumidifiers
These dehumidifiers work by condensing moisture from the air and draining the collected water, thereby reducing humidity levels.

Desiccant Dehumidifiers
These dehumidifiers use moisture-absorbing materials such as silica gel and are especially effective in low-temperature environments below 10 °C.